₹149.86 (Including GST) ₹127.00 ( + ₹22.86 GST) QUICK OVERVIEW Working voltage: 2.4V to 5.5V Built-in regulator Two modes Simple 8 key mode with independent 8 Channel parallel output. Advanced 16 Key modes with I2C interface output. Modes can be selected and configured by the user. Adjustable sensitivity
₹69.62 (Including GST) ₹59.00 ( + ₹10.62 GST) Specifications: Wide range of input voltage varying from 4.V to 12V (+5V recommended) The output voltage is High/Low (3.3V TTL) Can distinguish between object movement and human movement Has to operate modes – Repeatable(H) and Non- Repeatable(H) Cover distance of about 120° and 7 meters Low power consumption of 65mA Operating …
₹76.70 (Including GST) ₹65.00 ( + ₹11.70 GST) Specifications: Detects a flame or a light source of a wavelength in the range of760nm-1100 nm Detection distance: 20cm (4.8V) ~ 100cm (1V) Detection angle about 60 degrees, it is sensitive to the flame spectrum. Comparator chip LM393 makes module readings stable. Adjustable detection range. Operating voltage 3.3V-5V Digital and Analog …
₹649.00 (Including GST) ₹550.00 ( + ₹99.00 GST) Specifications: Model :PPD42NS Detectable particle size approx. :1μm (minimum.) Detectable range of concentration: 0~28,000 pcs/liter (0~8,000pcs/0.01 CF=283ml) Supply Voltage: DC5V +/- 10% (CN1:Pin1=GND, Pin3=+5V) Ripple Voltage within 30mV Operating Temperature Range 0~45°C Operating Humidity Range :95%rh or less (without dew condensation) Power consumption :90mA Storage temperature: -30~60°C Time for stabilization :1 …
₹483.80 (Including GST) ₹410.00 ( + ₹73.80 GST) Features: Power supply voltage: DC5 ± 2V Sensitivity: 0.5V / (0.1mg / m3) The minimum detection level of particles: 0.8 m Clean air voltage: 0.9V typ. Low consumption current (Icc: MAX. 20 mA) The presence of dust can be detected by the photometry of only one pulse Enable to distinguish smoke …
₹149.86 (Including GST) ₹127.00 ( + ₹22.86 GST) Specifications: Operating Voltage is +5V Can be used to detect LPG or Butane gas Analog output voltage: 0V to 5V Digital Output Voltage: 0V or 5V (TTL Logic) Preheat duration 20 seconds Can be used as a Digital or analog sensor The Sensitivity of Digital pin can be varied using the …
MQ-6 Module (LPG, Ethenol steam, Smoke Interference) Read More »
₹149.86 (Including GST) ₹127.00 ( + ₹22.86 GST) Specifications : Detecting Concentration: 300 to 10000 ppm Input Voltage: 5 VDC Power: 150 mA Digital Output Voltage: TTL digital 0 and 1 (0.1 V and 5 V) Analog Output Voltage (relatively clean): 0.1 V to 0.3 V Analog Output Voltage (highest concentration): 4 V
₹470.99 (Including GST) ₹399.15 ( + ₹71.84 GST) Specifications: Operating voltage of FLEX SENSOR: 0-5V Can operate on LOW voltages Power rating : 0.5Watt (continuous), 1 Watt (peak) Life: 1 million Operating temperature: -45ºC to +80ºC Flat Resistance: 25K Ω Resistance Tolerance: ±30% Bend Resistance Range: 45K to 125K Ohms(depending on bend) Compatiable with Arduino
